• Application : 2003-2004 Coupe, SE-R and Spec V
• Complete 2-piece, cat-back exhaust system
• Stainless steel construction
• 4 HP and 5.5 lb-ft gain to front wheels (as tested on Sentra SE-R and Spec V)
• 50-state emmisiions legal
• Precise bolt-on installation
• Double-walled tip with laser-etched NISMO logo

• Application : 2003-2004 manual transmission (all)
• Available materials include carbon fiber, aluminum and titanium
• Laser-etched NISMO logo
• Precise thread-on installation
• 5- and 6-speed shift pattern decals included

Part#:32865-RN304 (Chrome) : $65.00
Part#:32865-RN305 (Black) : $65.00
Part#:32865-RN308 (Titanium) : $140.00
Part#:32865-RN309 (Carbon Fiber) : $75.00
Call Best Nissan Parts to order: 504-363-1918

• Application : 2003-2004 Sentra SE-R and Spec V
• Lightweight alloy
• 17" x 7.5" (clears 2004 Brembo brake option)

Best Nissan Parts Price : $1,450.00 / Set of 4
Part#:40300-RN750-SL (Silver) : $362.50/ea
Part#:40300-RN750-BR (Bronze) : $362.50/ea
Call Best Nissan Parts to order: 504-363-1918

NOTE: Wheels are available individually. 4 individual wheels must be ordered per vehicle.

• Application : 2003-2004 Sentra, SE-R and Spec V
• 23mm solid steel
• Increases roll stiffness for quicker turn-in and less body lean
• Precise bolt-on installation
• Includes firmer bushings with higher density rubber

Set Part#: 54600-RSB50 : $225.00
Call Best Nissan Parts to order: 504-363-1918

• Application : 2003-2004 Sentra, SE-R and Spec V
• Direct-embroidered NISMO logo
• Custom fit to vehicle interior
• Stain-resistant finish
• 4-piece set, black only

Part#: 74902-RNB50 : $79.00
Call Best Nissan Parts to order: 504-363-1918

• Satin Finish
• Stainless Steel

Part#: 999MB-SP001SA : $31.95

• Black powder coated finish
• Stainless Steel

Part#: 999MB-SP001BK : $31.95

• Polished Finish
• Stainless Steel

Part#: 999MB-SP001 : $31.95
Call Best Nissan Parts to order: 504-363-1918

• Application : 2003-2004 Sentra, SE-R and Spec V
• Lowers vehicle by 25mm front and 15mm rear
• Spring rate and damping force tuned specifically for SE-R and SE-R Spec V
• Provides improved steering response
• Precise bolt-on installation
• Reduces body lean, pitch, and dive
• Provides neutral, balanced handling

Part#: 5300S-RSB50 : $1,000.00
Call Best Nissan Parts to order: 504-363-1918

ATTENTION !!! These parts have been designed and are intended for off-higway application only. The installation of these parts on vehicles intended for use on public streets or highways may violate laws and regulations relating to motor vehicle safety standards or emission regulations. Additionally, these parts are sold "as is," without warranty of any kind whatsoever, express or implied, (including all warranties of merchantability or fitness for a particular purpose). the installation of these parts could also void vehicle or other Nissan warranty coverage, or result in otherwise covered repairs being excluded from coverage. Refer to an authorized Nissan dealer or performance specialist for proper installation.

• Application : 2003-2004 Sentra 2.5s, SE-R and Spec V
• 16 HP and 11.6 lb-ft peak increase at front wheels
• Equal length tubing
• 100% T-304 stainless steel construction
• 1.625" primary tube diameter
• 2.5" collector
• Heavy-duty 3/8" flange

• Application : 2003-2004 Sentra 2.5s, SE-R and Spec V
• 12.2 HP and 7.3lb-ft peak increase at front wheels
• Equal length tubing
• 100% T-304 stainless steel construction
• 1.625" primary tube diameter
• 2.5" collector
• Heavy-duty 3/8" flange

• Application : 2003-2004 Sentra 2.5s, SE-R and Spec V
• Increases horsepower over wide rev range
• Maintains low-end torque while increasing mid-range and top-end power
• Computer designed for accurate lift and duration
• Ground from billet cores
• No other adjustments required of ECU or engine

• 8.7 HP and 10.4ft-lb-ft peak torque increase at front wheels (tested on Sentra SE-R and Spec V)
• Mandrel-bent 3" tubing maintains consistent inside diameter
• Designed to prevent inadvertent water indegestion
• Reusable, washable air filter
• Material: 6061 aluminum, 3" tubing

• Adjustable 25mm diameter sway bar, solid steel
• Increases roll stiffness for quicker turn-in and less body lean
• Precise bolt-on installation
• Includes bushings with high-density rubber

• Heavy-duty 16mm x 45mm bar links front strut towers
• Aluminum bar with steel brackets improves turn-in response
• Precise, bolt-on installation

• 25mm diameter hollow steel bar ties lower suspension pick-up points together
• Improves chassis rigidity for more precise handling
• Reduces ground clearance by 30mm
• Easy, bolt-on installation

• Semi-metallic, low-dust compound
• Greater braking torque and pad life
• Heat range: ambient temperature to 600/700 deg. F
• Quiet, rotor-friendly compound

• Semi-metallic, low-dust compound
• Greater braking torque and pad life
• Heat range: ambient temperature to 600/700 deg. F
• Quiet, rotor-friendly compound

• Increased durometer rubber
• Improved road feel and responsiveness
• Kit includes 7 increased durometer bushings for rear suspension as well as left and right side transverse links with increased durometer bushings for the front suspension.
• Specifically designed for SE-R